Your iron loses a lot of water and no longer works perfectly It’s the limescale
‘s fault ! In any case, it will not be necessary to buy a brand new one, but to follow some important precautions and keep it clean over time. preventing the formation of limescale is possible, through constant and thorough cleaning, using the right techniques. Limescale is the number one enemy of the iron: it can compromise its normal functioning and completely ruin the garment to be ironed. This, in particular, is not formed only on the iron plate, but also in the boiler, in the tank and inside the holesfrom which the water vapor escapes.
Due to these limestone formations , the iron loses its power, until it irremediably stains the garments with halos and white streaks, which force a new wash. Therefore, working to eliminate limescale from the iron is of fundamental importance, and not only from the plate itself. There are, in fact, numerous ideal techniques to solve this problem. If not caught in time, in fact, you could risk having to go to the store to buy a new iron . Prevention is better than cure, right How to clean the boiler and the iron plate from limescale Clean the iron from limescaleand an operation of fundamental importance, especially to avoid damaging the clothing and, in the worst case scenario, having to buy a new appliance. Dishwashing detergent is also a very good product for cleaning the iron plate. A few drops in hot water are the solution to all your problems: in a moment your plate will shine again, especially if it is a Teflon, which has a coating very similar to that of non-stick pans. It takes very little! Some iron models are equipped with an anti-limescale system, others require continuous maintenance, as well as the use of a specific liquid.
There are numerous anti-limescale products on the market,but even the classic grandmother’s remedies have their effectiveness. For example, you might think about making a mixture of white wine vinegar and hot water to clean your iron, all of which are readily available ingredients that you can pour into a convenient basin. After that, use a sponge soaked in the same mixture and wipe it well over the entire affected area. After letting it sit, she dries with a microfiber cloth. It is good to carry out this sort of maintenance on an ongoing basis, so as to be able to preserve the functionality and integrity of the appliance. Wine vinegar is not only perfect for eliminating limescale, but it is a valid ally to clean the plate of the iron from old burns.
Alternatively, you can also choose to use bicarbonate for a deep cleaning of the iron: hot water and a spoonful of baking soda are the perfect combo to remove dirt and limescale. Here too, get a sponge and treat the surface in all its points: from here on, you will already notice the first improvements. Baking soda is also ideal for fighting bad odors, but if you prefer a light scent, you can add a few drops of lemon.
We advise you to buy specific products, only if these natural remedies do not work properly and if the plate has stubborn dirt, difficult to get rid of. In this regard, it is advisable to clean the plate periodically.
Burns, dirt and limescale are unfortunately elements which, if not treated in time and in the right way, risk settling without any way back. Eventually, for cleaning the soleplate of your iron, you could opt, always in the case of extreme dirt, for the so-called sticks. These are, in fact, products with a strong smell of ammonia, which are passed on the plate and the residues removed only afterwards with a dry cloth. How to clean the iron from burns
Burnsglued on the plate of the iron are a nice nuisance and the ideal is to clean them and eliminate them. Wine vinegar is the perfect ally to eliminate this type of problem: use it, even here, with hot water and coarse salt. Once you have your magic recipe, use a sponge to clean up the area. Be careful, never use an abrasive sponge, or you will damage your appliance!
In case you don’t have vinegar at home, you can fold over the coarse salt and some lemon juice, and sprinkle the iron plate. After leaving it on for a few minutes, at least five, remove the mixture with a dry cloth. And here it is, your iron will be as good as new!
Another effective remedy is to use waxto better clean the iron plate from burns. In fact, it will be more than enough for you to light a candle and rub the burned area until it melts. Then remove any residue with a microfiber cloth and you will notice that even the burns will tend to “unglue” completely. It tends to be an old method, but very effective!
Dishwashing detergent is also a very good product for cleaning the iron plate. A few drops in hot water are the solution to all your problems: in a moment your plate will shine again, especially if it is a Teflon, which has a coating very similar to that of non-stick pans. It takes very little!
If you are an overworked person, with little time to devote to housework and always in a hurry, we have the last minute remedy for you: toothpaste. You read that right, toothpaste is the solution to all your problems! It is good that it is a toothpaste in paste and not in gel, but surely you will have it at home. A small amount will be enough to remove burns quickly and optimally: a damp cloth and go! The iron soleplate begins to be cleaned. How to clean limescale from the iron tank.
Also the iron tankrequires continuous and careful maintenance. A first precaution is to always use distilled water only, as tap water is rich in limestone. Here too, the protagonist is white vinegar together with distilled water. prepare a solution of these two liquids, in the quantities you deem appropriate, and thoroughly clean the tank of the iron.
First, let the iron heat up so that the steam can escape, then turn it off and remove the water already in the tank. By repeating the procedure several times, the limestone will dissolve completely and will be expelled once and for all.
The luck of some household appliances is precisely that of being equipped with an anti-limescale systemwhich certainly facilitates cleaning. In any case, it is good to eliminate the water that remains after each work cycle, in order to keep the iron in optimal conditions, without resorting to extreme remedies.
Now that you have learned all the best secrets for cleaning your steam generator, soleplate and tankfrom limescale and stubborn dirt, you can no longer go wrong. Correct and constant maintenance of the appliance is the crucial point for safeguarding its integrity. And don’t worry if you don’t have a lot of time to spend on house cleaning, we’ve given you all the tips so you can still do a great job. however, we recommend that you buy an iron equipped with an anti-limescale system: this is an excellent point to be able to use to your advantage and make less effort in the future. Today, fortunately, technological innovations have led to sufficiently intelligent means capable of satisfying every need.
Now it’s your turn, clean your iron better!
